Ifthe Auto Playfeature isset to ON,the tape automatically
begins playback (if the safety tab onthe cassette isremoved).
• PressFWD orREV to position the tape.
• PressPLAY (if necessary) to begin tape play.
• Press PAUSEfor stop action.
• PressTRACKING up or down to remove any streaks from the
picture, if necessary.
• Press STOP to stop playback.
AUTOMATIC REWI N D
The VCRautomatically rewinds the tape if it reaches the end
of the tape during playback. While rewinding, you can press
POWER on the VCR (OFF on the remote) and the VCR will turn
off after rewinding.
TAPE EJECT
Press EJECTon the VCRwhen it isstopped to eject the tape.

RECORDING

If you want to record something that you're watching, you can
use basic recording.
1. Set the tape speed by pressing the SPEED button on the
remote (see margin note for information about tape speed
settings).
2. Press the RECORD button to begin recording.
3. Press STOP to stop recording.
If you just want to pause the recording for a short time (during a
commercial, for instance), press PAUSE instead of STOP.
I •
Pause
If you pause, the VCR automatically
switches from pause to stop after a
few minutes to reduce tape wear.
Tape Speeds
SP(Standard Play)
Gives the best quality recording, but
fewer programs can be recorded on
the tape. Special effects such as
pause, slow motion, picture search,
and frame advance work well when
you play back tapes recorded in
this speed.
LP (Long Play)
Your VCR is capable of playing back
tapes recorded in LP.You cannot
record in the LP speed.
SLP (Super Long Play)
Gives three times the recording time
of tapes recorded in SP. Special
effects such as pause, slow motion,
picture search, and frame advance
work well when you play back
tapes recorded in this speed.
Cassette
T-120
T-160
Reco_ing Time
SP SLP
2Hr 6Hr
2Hr 8Hr
40Min
25