![](/images/new-backgrounds/1230228/230228133x1.webp)
Clock shows incorrect time or date
•Power interruption.
•Check to make sure the clock is set accurately (check AM/PM and date).
•Check
VCR makes noise when stopped
•VCR is removing tape from heads. This is normal. The head cylinder inside the VCR will continue to rotate for a few minutes after you put the VCR in the stop mode.
Will not Auto Channel Search active channels correctly
•Check to make sure the antenna connections are secure and correct.
•Check to make sure the Signal Type: CABLE/ANTENNA feature is set correctly.
•If Detect Automatically was selected for the Signal Type in the Auto Channel Search menu, try using either CABLE TV or
ANTENNA instead.
Tape plays back in slow motion
•Press PLAY to return to normal playback.
Cannot select channels over 69
•Cable channels over 69 can only be selected if Signal Type: CABLE!ANTENNA feature is set to CABLE.
Cassette with safety tab removed does not start to play automatically
•Check to)make surethe Auto PlayON/OFFfeature isset to ON.
TIMER Indicator flashes in display
•Check to make surethere isa cassettein the VCR when a timer recording isset.
Time counter disappears during searching
•This isnormal.
•Check Language feature.
No stereo sound during playback
•Check to make sure the Playback:
•Must use the AUDIO/VIDEO jacks on the back of the VCR to hear stereo sound.
Stereo audio too noisy
•Stereo signal is weak. Set Reception: STEREO/MONO/SAP feature to MONO.
•Press one of the TRACKING up or down buttons to minimize the noise.
63