RCA VR628HF manual Programming TH E Remote to Control AN Auxi Liary Component, Audio/Video Codes

PROGRAMMING TH E REMOTE TO CONTROL

AN AUXI LIARY COMPONENT

Your remote can be programmed to operate RCA, ProScan, and Dimensia brand auxiliary equipment, such as a radio, CD player, tape player, turntable, amplifier, digital satellite receiver, or DVD player.

1.Turn on the component to be programmed.

2.Look up your component's code number on the code list.

3.Press and hold the AUX button.

4.Enter the code from the code list.

5.Release the AUX button and press PWR or CHAN up or down to see if the audio component responds to the remote commands.

OPERATI NG TH E AUXI LIARY COMPONENT

After you have programmed your remote, see which buttons will operate your component.

1.Point the remote at the component and press AUX. If it does not turn on, press AUX and then PWR.

2.You may want to experiment to see which buttons will operate your component. Try pressing buttons, such as PLAY, REV, and FWD.

Audio/Video Codes

RCAdProScanlDimensia
AM/FM		03
Auxiliary Component		04
CD		07
DVD	..............................................	10
Phono	......................................	. .... 05
Digital	Satellite Receiver	08
Tape	I	06
Tape	2	09

This remote may not operate all

models of the brands that are shown.

38