VCR BASICS

Numbers (0 through 9) Select a channel up to 99 by pressing two numbers. Select a cable channel over 99 by pressing and holding 1 until 1 – – appears on the screen. Then press the other two numbers.

OFF Turns the TV off.

VOL Up and Down Raises and lowers sound of TV.

PLAYING A TAPE

1.Tune the TV to your VCR viewing channel (3, 4, or TV’s video input).

2.Insert a tape in the VCR.

POWER

TV•VCR

REV

PLAY•PAUSE

FWD

EJECT

CHANNEL

TRACKING

INPUT RECORD STOP PAUSE

If the Auto Play feature is set to ON, the tape automatically begins playback (if the safety tab on the cassette is removed).

Press FORWARD or REVERSE to position the tape.

Press PLAY (if necessary) to begin tape play.

Press PAUSE for stop action.

Press TRACKING up or down to remove any streaks from the picture, if necessary.

Press STOP to stop playback.

AUTOMATIC REWIND

The VCR automatically rewinds the tape if it reaches the end of the tape during playback. While rewinding, you can press POWER on the VCR (OFF on the remote) and the VCR will turn off after rewinding.

Pause

If you pause, the VCR automatically switches from pause to stop after a few minutes to reduce tape wear.

Automatic Tracking

The VCR has automatic tracking which adjusts the picture when playing back a tape recorded on another VCR.

Automatic tracking is turned on whenever a tape is inserted or the VCR’s power is turned on.

24

Page 26
Image 26
RCA VR643HF manual Playing a Tape, Automatic Rewind, Pause, Automatic Tracking