RCA VR643HF manual Tracking, ON-SCREEN Displays

OTHER FEATURES

For example, if you record a 30-minute program at the beginning of the tape and you want to go to the end of that program to begin another recording, you would:

1.Pr ess INFO twice on the remote to display the time counter.

2.Press CLEAR to reset the time counter to 0:00:00.

3.Press FOR WARD (FWD) to f orward the tape until the time counter reads 0:30:00.

4.Pr ess ST OP.This is the a pproximate end of the program. (You may want to press PLA Y to verify.) Now, you can begin recording at this spot.

5.Press INFO to remove the time counter from the screen and return to the normal display mode.

TRACKING

Your VCR has automatic tracking which r emoves the str eaks or snow from the picture. Automatic tracking is activated when you insert a tape or turn on the VCR. Occasionally you may need to manually adjust tracking, especially if the tape was recorded on a differentVCR. Just use the TRA CKING buttons to r emove the streaks or snow.You can also use tracking when you pause a tape to reduce jittering of the picture.

When you manually adjust the picture, automatic tracking is turned off.To turn automatic tracking back on, press both TRACKING buttons on the VCR at the same time, or eject the tape and re-insert it.

Tracking only effects playback—not recording.

0:30:00

Hours

Minutes

Seconds

ON-SCREEN DISPLAYS
The INFO button sho ws the status of theVCR (ST OP, PLAY,
RECORD , etc.), channel number, time counter, date, time, and
tape speed on the TV screen. The date and time must be set	1
before they can be displayed.

1.Press INFO to see all of the on-screen displays. These will automatically time out after a few seconds

Stop Ch 05 0:30:00

11/18/97 Tue 01:30PM SLP

On-screen display

(times out)

46