RCA VR643HF manual To Change the Signal Type, To Add or Remove Channels, Detect Automatically

SETTING UP THE VCR

AUTO CHANNEL SEARCH

Now scanning channel 14

Press any key to cancel

The VCR begins scanning for the available channels—this takes about one to two minutes. The lowest channel is tuned once the search is complete. Now pressing CHANNEL up or down should only select the active channels.

To Change the Signal Type

1.Press MENU to display the VCR MAIN MENU.

2.Press 4 to display the CHANNELS menu.

3.Press 3 to change the Signal Type between CABLE and

ANTENNA.

To Add or Remove Channels

You may want to add or remove channels after you Auto Channel Search, especially if some of the channels have weak signals or you don’t want to watch them.

1.Press MENU to display the VCR MAIN MENU.

2.Press 4 to display the CHANNELS menu.

3.Press 2 to display the ADD/REMOVE CHANNELS screen. Use CHANNEL up or down or number buttons to go to the channels you want to remove or add.

ADD/REMOVE		CHANNELS	ADD/REMOVE			CHANNELS
Channel 115			Channel 115
is presently		ADDED	is presently			REMOVED
Press	CLEAR to remove		Press	INFO	to add
Press	MENU to exit		Press	MENU	to exit

Detect Automatically

A strong cable or antenna signal in your area may cause Auto Detect to mis-detect. If this should happen, select 1 or 2 for the system you have.

Selecting Channels

The CHANNEL up and down buttons access those channels active in your VCR channel list.

You can still access channels not in the channel list by using the number buttons on the remote.

11