OTHER FEATURES
3.If you want to search through a certain number of index marks, press two number buttons to enter the number of marks you want to search. Pr ess CLEAR on the r emote to correct an entry.
4. Press FOR WARD (FWD) to sear ch forward or REVERSE (REV) to search in reverse. The VCR will locate your index mark and begin playback. If you did not enter a specific index number, the VCR will locate the next index mark and begin playback.
5.Press STOP to stop index searching. Some index marks may be missed by the VCR:
• A mark too close to your location on the tape.
•The mark at the beginning of a recorded segment of five minutes or less.
•The first index mark on the tape when you start at the beginning of the tape.
GO-TO SEARCH
The
1.Press ST OP.
2.Press SEARCH on the remote until the
3.Press number buttons to enter the hour(s) and/or minutes of the counter reading you want the VCR to “go to”. Press CLEAR on the r emote to cor rect an entry.
4. Press FOR WARD (FWD) to sear ch forward or REVERSE (REV) to search in reverse.
5. Press ST OP to stop
TIME COUNTER
The time counter shows the actual time it takes to record a program or play back a segment of a recorded tape. It helps locate the beginning or end of programs you taped. The time counter resets to 0:00:00 whenever the tape is ejected from the VCR.
INDEX SEARCH
Searching for
index number 12...
Press STOP to cancel
INDEX SEARCH
Searching for
index marks...
Press STOP to cancel
Current tape counter is
2:17:25
Press REV or FWD to go to
Press SEARCH to exit
Searching for
0:00:00...
Press STOP to cancel
45
