SETTING UP THE VCR

SAT SETUP

The VCR will now receive all signals from the SAT receiver on channel 03.

Press MENU to continue

5.Press MENU and enter the code for your digital satellite receiver from the Satellite Receiver Code List.

SAT SETUP

Enter the code for your SAT receiver from the list in your User's Manual

--

Press MENU to cancel

6.Turn on your satellite receiver and tune it to channel 100 and then press MENU. Follow the on-screen directions.

SAT SETUP

Please turn on your SAT Receiver and tune it to channel 100.

Press MENU to continue

Once you have completed the setup, the VCR confirms the satellite receiver setup is completed or canceled.

CABLE BOX SETUP

This setup applies only when all channels are received through the cable box. There are two steps:

The first sets up the VCR for the output channel of the cable box signal.

The second sets up the VCR for a remote-controllable cable box so the VCR can control the cable box by changing channels for timer or VCR Plus+ system recordings. Position the remote-controllable cable box above the VCR as shown

in the Connections section.

Satellite Receiver Codes

Dishnet (Echo)

78

GE

00, 01

Hughes Network

77

Panasonic

75

Primestar

76

ProScan

00, 01

RCA

00, 01

Sony

72

Toshiba

73

This VCR may not control all models of the brands that are shown.

10

Page 12
Image 12
RCA VR704HF manual Cable BOX Setup, Satellite Receiver Codes