PROGRAM THE REMOTE
PROGRAMMING THE REMOTE TO CONTROL AUXILIARY COMPONENTS
Your remote can also control the brands of the equipment listed, such as a radio, CD player, tape player, or phonograph. It is already programmed to control some ProScan and RCA amplifiers and audio/video receivers.
1.Turn on the component to be programmed.
2.Look up your component’s code number on the code list.
3.Press and hold the AUX button.
4.Enter the
5.Release the AUX button and press ON•OFF or CHAN up or down to see if the auxiliary component responds to the remote commands.
OPERATING THE AUXILIARY COMPONENT
After you have programmed your remote, see which buttons will operate your component.
1.Point the remote at the component and press AUX. If it does not turn on, press AUX and then ON•OFF.
2.You may want to experiment to see which buttons will operate your component. Try pressing buttons, such as play, REVERSE, and FORWARD.
ON OFF
AUX
CH +
C H -
REVERSE PLAY FORWARD
You’ll use these buttons when you program the remote to control an auxiliary component.
Auxiliary Component Codes
Proscan/RCA/Dimensia (Only)
AM/FM | 0003 |
Auxiliary Component | 0004 |
CD | 0007 |
SAT1 | 0008 |
SAT2 | 0011 |
DVD | 0010 |
Phono | 0005 |
This remote may not operate all models of the brands that are shown.
44
