OTHER FEATURES
INDEX SEARCH
The VCR has a “VHS Index Search System” that automatically records an index mark on the tape every time you start a recording.
During playback you can locate the program you want to play by the number of index marks or by scanning. The VCR will search forward or reverse from the location you are on the tape.
To Search:
1.Press STOP.
2.Press SEARCH on the remote to display the INDEX SEARCH screen.
3.If you want to search through a certain number of index marks, press two number buttons to enter the number of marks you want to search. Press CLEAR on the remote to correct an entry.
4.Press FORWARD to search forward or REVERSE to search in reverse. The VCR will locate your index mark and begin playback. If you did not enter a specific index number, the VCR will locate the next index mark and begin playback.
5.Press STOP to end index searching.
Some index marks may be missed by the VCR:
•A mark too close to your location on the tape
•The mark at the beginning of a recorded segment of five minutes or less
•The first index mark on the tape when you start at the beginning of the tape
INDEX SEARCH
Press REV OR FWD to begin scanning
OR
enter a specific index number
_ _
Press SEARCH to exit
INDEX SEARCH
Searching for
index number 12...
Press STOP to cancel
INDEX SEARCH
Searching for
index marks...
Press STOP to cancel
If you insert a
GO-TO SEARCH
The
1.Press STOP.
2.Press SEARCH on the remote until the
3.Press number buttons to enter the hour and/or minute of the counter reading you want the VCR to “go to.” Press CLEAR on the remote to correct an entry.
4.Press FORWARD to search ahead or REVERSE to search behind.
5.Press STOP to end Go-To searching.
Current tape counter is 2:17:25
Press REV or FWD to go to
Press SEARCH to exit.
Current tape counter is 2:17:25
Press REV or FWD to go to 0:00:00
Press SEARCH to exit.
54
