Recoton/Advent EC Series Zero Operation, Sampling, Calculating Average Piece Weight APW, EN-8

pcs

0.

0.

EN-8 EC Series

4.4 Zero Operation

Center of Zero is indicated by the

Press ZERO to zero the weight dis- play.

“CEntr” will be displayed momentarily before the display is zeroed.

annunciator.

Weight	g	Piece Weight g/pc	Count	pcs
------		CEntr	------
	0.0	0.		0.

4.5 Sampling, Calculating Average Piece Weight (APW)

Place the desired sample onto the
	Weight	g	Piece Weight g/pc	Count	pcs
weighing pan (or into a tared con-
	3000.0				0.
			0.
tainer) (ex. 3000g).
Press SAMPLE. “SAmP” will be dis-
	3000.0		SAnnP	------
played momentarily before the calcu-
lated APW is confirmed (based on the	3000.0		300.000		10.
last sample size entered or ex-factory
default 10 if used for the first time).
Or, enter a new sample size (ex. 50)
	3000.0		50.		60.
via the numeric keypad before press-
ing SAMPLE.	3000.0		SAnnP	------
NOTES:	3000.0		60.0000		50.

;The larger the sample size, the more accurate the APW.

;The sample size entered is retained even after the unit is turned off.

;Unless stored into memory (refer to Sec.4.7), Piece Weight values are not retained when the unit is turned off.

4.6 Entering a Known Piece Weight

Enter the value of a known piece weight via the numeric keypad (ex. 40g/pc.), then press APW (with a weight on the pan, the piece count is automatically calculated and dis- played).

Weight	g	Piece Weight g/pc	Count
	0.0
		40.
	0.0	40.

NOTES:

;To clear the Piece Weight value, press C.

;“Wt. Lo” annunciator will turn on if the total sample weight is less than 10 display divisions. Add more samples for a more accurate or stable reading.

;“APW Lo” annunciator will turn on if the APW value is less than 1/10th display divisions. Increase the piece weight value for more accurate results.

;Initate entry of decimal values with a “0”. For example. 0.5g is entered as “0” ”.” “5”.

3 EC-textEN.pmd 8 8/9/2005, 1:41 PM