Recoton/Advent U31-NG2 Hampton Cast Faceplate Grill Installation, Slide side fi ller bracket

INSTALLATION

11)Mount the cast faceplate panels onto the insert body, sliding the side fi ller brackets into the space between the glass and the fi rebox. Secure using the 4 remaining black screws, 2 per side.

Slide side fi ller bracket

into gap between glass and fi re box.

HAMPTON CAST FACEPLATE

GRILL INSTALLATION

Before the grills are installed, a grill stop bracket needs to be put in place.

1)The U31 grill stop bracket is installed in the bottom left corner just under the fi rebox with the screw supplied as shown below.

U31 Grill

Stop

Bracket

12)Install the glass trim by inserting the side hooks on the glass trim into the 4 slots between the faceplate and the glass. Push the glass trim down fi rmly with both hands to lock into place.

Side Hook

Slots

13)To put on the Hampton logo, peel the sticker from the back of the logo and place it centered on the bottom left hand corner of the faceplate.

Hampton Logo	Left Hand
	Side Faceplate

2)Place top grill into brackets located inside top of fi rebox as shown.

Bracket inside top of fi rebox.

Bracket

Top Grill

Note: The top louver should be placed with the curved cut-out facing up.

3)The bottom louver, shown in the diagram below, has 2 hinges that are attached to the lip on bottom of the unit. Secure using 2 screws per hinge.

18 FPI U31-2 Gas Fireplace Insert