INSTALLATION
FULL SCREEN FRONT
1)Hold the full screen door up against the unit in order to make the following wire connections.
Pull the ON/OFF connector wires from the fi rebox and connect them to the switch.
Connect the fan switch wires with the wire connectors from the fan speed control. Place clips over wires and tuck into side trim.
3)Completely secure the full screen door to the unit by securing 4 screws to the Left and Right Side Trims.
.
NOTE: When mounting the full screen door to the unit, the inside fl ange of the side trims are to fi t over the inner side of the unit fl ange and NOT next to the outer side of the unit fl ange.
2)Lift unit up slightly and push down on the corners of the Bottom Trim Bracket and slide under unit. Unit should touch tabs on Bottom Trim Bracket.
Inside fl ange of Side Trim goes over
the inner side of the unit fl ange.
Push in Corners
Bottom Trim Bracket
FPI | 15 |
