Model 5 Integrated Amplifier Features:
¥Selected and matched
¥Onboard plate current meter
¥Switch selection of Triode or Ultralinear mode
¥Five line stage stereo inputs
¥Unbuffered
¥Regulated power supply for output tubes
¥Separate reference supplies for high voltages
¥
¥Separate bridge rectifiers and regulators for each channel
¥Large
¥All transformers are electrically isolated and mechanically
¥
¥Additional internal damping material for added control of mechanical resonance
¥Standby mode to reduce power consumption and extend tube life
¥Cardas¨ speaker binding posts
¥4, 6 and
¥Adjustable optimized feedback for each output impedance tap
¥
¥
¥
¥Fuses protect amplifier circuit if any tube is over current
¥LED indicators in tube sockets light when overcurrent fuses blow
¥OptionalÐFull cage to protect tubes
Specifications
Tubes compliment | 2 each 12AT7 per channel |
| 2 each EL34/6CA7 per channel |
Power output | 45 watts / 1 kHz / 1% THD |
Frequency response | 5 Hz to 50 kHz, |
Power bandwidth | 16 Hz to 30 kHz, |
Input sensitivity | .125V for full output, attenuator set at maximum |
Input attenuator | 23 positions, 66 dB of attenuation |
Input impedance | 75k ohms |
Output taps | 4, 6 and 8 ohms |
Overall negative feedback | 7.5 dB |
Hum and noise | >85 dB SN Ref 1 W, no weighting |
Power requirements | 350 watts maximum |
AC requirements | 100v/120v/220~240V (CE countries set to 230V) |
Dimensions | 12.5 d x 17.0 w x 7.5 h |
| 31.75cm x 43.18cm x 19.05 cm |
Weight | 54 lb (25 kg) |
Weight:shipping | 64 lb (29 kg) |