EBZ8050/RH
8. Operation
F11
■ADJUSTING THE SHOULDER STRAPS
Tightening:
• Pull on the end of the strap.
F15 [EBZ8050]
(1)
■STOPPING ENGINE [EBZ8050]
• Move the throttle lever to the idling position and press the stop switch (red button). The machine has the mechanism that once the stop button is pushed the plug won't give off sparks until the engine stops. (F15)
(1) Stop Switch
Loosening:
•Pull up on the lower portion of the buckle with a finger and slide the end of the strap back up to the buckle.
F16 [EBZ8050RH] [EBZ8050RH]
•Move the throttle lever to the idling position and set the ignition switch to
the stop position. (F16)
(1)
(1) Ignition Switch
F13 |
F14 |
(1) |
■EMERGENCY REMOVAL
•In an emergency, pull up on the lower portion of both strap buckles to loosen the straps. Move yourself away from the unit.
■ADJUSTING IDLE SPEED (F14)
•The idling speed is set for 2000 rpm at the factory. If it is necessary to adjust the idle speed, use the adjustment screw on the top side of carburetor.
(1) Idling Adjustment Screw
F17 |
(1) |
(2) |
(3) |
NOTE
If the engine won’t stop when setting the ignition switch to the stop position, close the choke lever and stop the engine.
In this case, please repair the machine at your nealest servicing dealer. (F17)
(1)Choke Lever
(2)OPEN
(3)CLOSE
