HTZ2460/HTZ2460L/CHTZ2460/CHTZ2460L

8. Maintenance

IMPORTANT

•If waste gets stuck and causes blockage around the intake air cooling vent or between the cylinder fins, it may cause the engine to overheat, and that in turn may cause mechanical failure on the part of the hedge-trimmer.

■SAFETY LOCK (MA8)

WARNING

• Stop operation when the safety lock

U

is defective.

S

• Safety lock is the device not to

accelerate the throttle lever without

intention. While pushing the safety lock,

MA5

■BLADES

Oil blades each gas tank filling (MA5).

WARNING

•Make sure that the blade bolts are well tightened.

•The blade assembly is designed to automatically compensate for any play between the blades.

MA8

you can accelerate the throttle lever.

1.

Check if the throttle lever does not

 

move when you do not push the safety

 

lock.

2.

Check if the throttle lever moves when

 

you grasp or release it while pushing

 

the safety lock.

3.

Check if the safety lock returns to its

 

original position when you release your

 

hand from safety lock.

Check the cutting edges and reform with a flat file. (MA6)

MA6

Point :

 

1.

Keep the end corner sharp.

 

2.

Round the root of the edge.

 

3.

Do not use water when using a grinder.

IMPORTANT

•When mounting the blade, make sure to fasten the spacer, washer and bolt, then fasten the nut.

(1)Bolt

(2)Plate

(3)Spacer

(4)Nut

 

■ SHARPENING (MA7)

 

Always keep the file or sharpener at an

MA7

angle of 45° to the blade, and:

 

 

• Always grind in the direction of the

 

cutting edge;

 

• Note: files cut only in one direction; lift

 

the file from the blade when returning

 

to start a new pass;

 

• Remove all burr from the edge of the

 

blade with a slip stone;

 

• Remove as little material as possible;

 

• Before refitting the sharpened blades,

 

remove filings and then apply grease.

 

Do not try to sharpen a damaged blade:

 

change it or take it to a Service dealer.

MA9

MA10

•If you find any defects at the checks above, contact your nearest servicing dealer for repair.

(1) Safety lock

■REDUCTION GEARBOX

Refill gear housing every 50 working hours (MA9). Use greese pump. Feed greese until it comes out of the base of blades.

Grease nipple: A type

■ANTI-VIBRATION SYSTEM

WARNING

•The deformed or damaged anti- vibration system may cause of the breakages like getting rickety or falling off of engine and/or blade.

•[HTZ2460/HTZ2460L] Check periodically if the rubber cushions are not deformed or damaged.

•[CHTZ2460/CHTZ2460L] Check periodically if the springs are not deformed or damaged.

US-13

Page 12 Page 14
Page 13
Image 13
RedMax HTZ2460L, CHTZ2460 Safety Lock MA8, MA5, Blades, MA6, Sharpening MA7, MA9, Reduction Gearbox, ANTI-VIBRATION System
Page 12 Page 14

CHTZ2460, CHTZ2460L, HTZ2460L, HTZ2460 specifications

The RedMax CHTZ2460 series is a thrilling lineup of professional-grade trimmers designed for efficiency and performance. This series includes the CHTZ2460, HTZ2460, HTZ2460L, and CHTZ2460L models, each tailored to meet the diverse needs of landscaping professionals and garden enthusiasts alike.

One of the standout features across the CHTZ2460 series is the powerful engine. Each model is equipped with a high-performance, 24.5cc two-stroke engine that delivers robust power while maintaining fuel efficiency. This allows users to tackle dense grass and tough weeds effortlessly, making it an ideal choice for larger properties and commercial jobs.

In addition to engine power, the ergonomic design of these trimmers significantly enhances user experience. The lightweight construction mitigates fatigue during prolonged use, while the adjustable handlebars allow for customizable comfort settings. This ergonomic approach ensures that operators can maintain precision in their work without compromising on their comfort.

The CHTZ2460 series also integrates advanced technologies aimed at optimizing performance. The models feature an efficient air filtration system that prolongs engine life by keeping dust and debris at bay. This technology not only enhances performance but also reduces maintenance time, allowing users to focus more on their work.

Another notable characteristic is the ease of operation. The CHTZ2460, HTZ2460, HTZ2460L, and CHTZ2460L models include a simple starting system, making them user-friendly for both seasoned professionals and newcomers. The easy-to-access throttle and trigger controls permit smooth operation, enhancing overall efficiency during trimming tasks.

Moreover, the trimmers come with a variety of cutting attachments, providing versatility for different applications. Whether you need a standard trimmer head for grass or specialized attachments for tougher brush, the CHTZ2460 series accommodates various landscape requirements.

Durability is also a crucial element of the RedMax CHTZ2460 series. Built with high-quality materials, these trimmers are designed to withstand harsh working conditions. This rugged construction ensures longevity and reliability, making them a wise investment for anyone in the landscaping business.

In summary, the RedMax CHTZ2460, HTZ2460, HTZ2460L, and CHTZ2460L models are engineered to offer powerful performance, ergonomic design, advanced technology, and remarkable durability. Whether for commercial landscaping or residential yard maintenance, this series of trimmers is an exceptional choice for any enthusiast seeking both efficiency and effectiveness.
Top Page Image Contents