6. Set up

SE1

SE2

SE3

■MOUNTING ENGINE (SE1)

1.Push the driveshaft housing toward the clutch housing and rotate it by hand to check that the driveshaft is engaged with the gears.

2.Insert the driveshaft housing into the clutch housing until it bottoms, and align the positioning holes on the clutch housing and the shaft tube and install the screw. When difficult to engage, twist the engine slightly.

3.Fasten the clamp securely with two screws.

IMPORTANT

Tighten the screws gradually by turns.

■CONNECTING THROTTLE WIRE

1. Remove the air cleaner cover.

2. Connect the end of the throttle wire to the joint on the top of the carburetor. (SE2)

■CONNECTING SWITCH WIRES

•Connect the switch wires between the engine and the main unit. Pair the wires of the same color.

■INSTALL THE HANDLE

1.Remove both screws from the handle.

2.While spreading the handle at the mounting hole, position the handle on the outer tube as shown.

3.Reinstall the two mounting screws in the handle, but do not tighten them at this time.

NOTE

One side of the handle is recessed to receive the hex nuts.

4.Locate the handle at the best position for operator comfort (usually about 10inches (25cm) ahead of the throttle lever), and secure it by tightening the knob at the handle base.

14

Page 13 Page 15
Page 14
Image 14
RedMax RMSZ2500 manual Set up
Page 13 Page 15

RMSZ2500 specifications

The RedMax RMSZ2500 is a powerful and efficient backpack blower designed for professionals in landscaping and maintenance. As part of RedMax's robust lineup of outdoor power equipment, it stands out for its impressive combination of performance, comfort, and ease of use.

One of the key features of the RMSZ2500 is its powerful engine. Equipped with a high-performance 25.4cc engine, this blower delivers an air speed of up to 195 miles per hour and an air volume rating of 660 cubic feet per minute. This impressive output allows users to easily clear leaves, debris, and grass clippings from lawns and garden areas, making it ideal for both residential and commercial use.

The RMSZ2500 also incorporates advanced technologies that enhance its performance and user experience. One of the standout technologies is the X-Torque engine, which is designed to reduce harmful emissions and improve fuel efficiency. This means that users can operate the blower for longer periods without frequent refueling and with less impact on the environment. Supporting this is the company's Easy Start system, which makes starting the engine smoother and requires less effort, significantly reducing user fatigue during operation.

Comfort is paramount in the design of the RedMax RMSZ2500. The backpack frame is ergonomically designed, featuring adjustable shoulder straps and a padded backrest. This ensures that users can operate the blower for extended periods without discomfort. Additionally, the lightweight design helps minimize strain, allowing for greater maneuverability and ease of use in any landscaping task.

Durability and reliability are also important characteristics of the RMSZ2500. Built with a sturdy construction that can withstand the rigors of everyday use, this blower is engineered for longevity. The easy-access air filter simplifies maintenance, ensuring optimal performance over time.

In summary, the RedMax RMSZ2500 backpack blower combines a powerful engine, innovative technologies, and user-friendly design. Its X-Torque engine enhances fuel efficiency while reducing emissions, and the Easy Start system minimizes startup effort. With a focus on comfort and durability, the RMSZ2500 is an excellent choice for professionals seeking a reliable and efficient blower to tackle a variety of outdoor tasks.
Top Page Image Contents