9. | Insert the end of a Crosswalk Arm (121) into the | 9 |
|
|
|
|
| hole in the top of a resistance mechanism. |
|
|
|
| |
| Make sure that the bend in the Crosswalk |
|
|
|
|
|
| Arm is positioned as shown. |
| Bend |
|
|
|
| Tighten a #8 x 3/4" Screw (1) into the resistance |
|
|
|
| |
| mechanism and the Crosswalk Arm (121) from |
|
|
|
|
|
| the direction shown. Then, press a Small Cap |
|
|
|
|
|
| (119) into the hole for the Screw. | 121 |
|
|
|
|
| Attach the other Crosswalk Arm (121) as de- | Hole |
|
|
| |
| scribed above. |
| 119 |
|
| |
| Carefully lower the Crosswalk Arms (121) toward |
| 1 |
|
| |
| the Walking Belt (49). |
|
| 121 |
|
|
|
| Resistance |
|
|
| |
|
| Mechanism |
| Resistance |
| |
|
|
| 49 |
| ||
|
|
| Mechanism |
| ||
|
|
|
| 119 | 1 |
|
10. | Slide the Right Upright Cover (86) onto the | 10 |
|
|
|
|
| Right Upright (85). Remove the tie from the 5/16" | 87 |
|
| ||
| Cage Nut (38) in the Right Handrail (83). If neces- |
|
|
| ||
| sary, press the Cage Nut back into place. |
| Bracket |
|
| |
| Hold the Right Handrail (83) near the Right |
| 38 |
| ||
|
|
|
|
| ||
| Upright (85). Insert the Upright Wire (87) | 3 |
|
|
| 4 |
| through the bracket on the bottom of the Right |
|
|
| ||
| Handrail. Pull the Upright Wire out of the end of | 83 |
|
|
| 13 |
| the Right Handrail. |
|
|
| ||
| Attach the Right Handrail (83) to the Right |
|
|
|
|
|
| Upright (85) with two 5/16" x 1" Flat Head Bolts |
|
|
|
|
|
| (3) and a 5/16" x 1" Bolt (4) with a 5/16" Star |
|
|
|
|
|
| Washer (13); do not fully tighten the Bolts |
|
|
|
| 86 |
| yet. |
|
|
|
| |
| Attach the Left Upright Cover (not shown) |
|
|
|
| 85 |
| and the Left Handrail (not shown) in the |
|
|
|
| |
| same way. Note: There is no wire on the left |
|
|
|
|
|
| side. |
|
|
|
|
|
|
| 11 |
|
|
|
|
