15.Hold the Right Upright Cover (86) against the console assembly. Align the holes in the Right Upright Cover with the holes in the Right Upright (85). Attach the Right Upright Cover with two #8 x 3/4" Screws (1).
Attach the Left Upright Cover (80) to the Left Upright (84) in the same way.
See steps 4 and 6. Tighten the four 3/8" x 4" Bolts (7) and the two 3/8" x 1 1/2" Bolts (14).
16.Raise the Crosswalk Arms (121) (only one is shown). Raise the Frame (55) to the position shown. Have a second person hold the
Frame until this step is completed.
Orient the Storage Latch (51) so that the large barrel and the latch knob are oriented as shown. Attach the upper end of the Storage Latch (51) to the bracket on the Frame (55) with a 3/8" x 2" Bolt (8) and a 3/8" Nut (10).
Attach the lower end of the Storage Latch (51) to the Base (95) with a 3/8" x 1 3/4" Bolt (6). Note: It may be necessary to move the Frame (55) back and forth to align the Storage Latch with the Base.
Lower the Frame (55) (see HOW TO LOWER THE TREADMILL FOR USE on page 25).
15 |
|
|
86 |
| 80 |
1 | Console | 1 |
Assembly | ||
85 |
| 84 |
16 | 55 |
|
10 | 8 |
|
|
|
51 |
|
Latch | 121 |
Knob | |
Large |
|
Barrel95 |
|
| 6 |
17.Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. Note: Extra hardware may be included. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see pages 27 and 28).
14
