11.Set the console assembly face down on a soft surface to avoid scratching the console assem- bly. Remove the two #8 x 3/4" Screws (1). Next, lift off the Crossbar (107).
12.IMPORTANT: To avoid damaging the Crossbar (107), do not use power tools and do not overtighten the #10 x 3/4" Screws (2). Orient the Crossbar (107) as shown. Attach the Crossbar to the Handrails (82, 83) with four #10 x 3/4" Screws (2) and four #10" Star Washers (12); do not fully tighten the Screws yet.
Insert the Console Frame (102) into the Handrails (82, 83). Attach the Console Frame with four 1/4" x 1" Bolts (9); do not tighten the
Bolts yet. Be careful not to pinch the Upright Wire (87).
Tighten one #10 x 3/4" Screw (2) in each end of the Crossbar (107); do not overtighten the Screws. Then, tighten the other #10 x 3/4"
Screw (2) in each end of the Crossbar.
Tighten the four 1/4" x 1" Bolts (9).
11 | 1 | 107 |
| ||
| Console |
|
| Assembly |
|
12 |
|
|
|
First | 9 |
| 102 |
212 |
|
| |
82 | 107 | First | 9 |
|
| 212 | |
|
|
| 87 |
|
| 83 |
|
12
