ASSEMBLY
Make Things Easier for Yourself
Everything in this manual is designed to ensure that the weight bench can be assembled suc- cessfully by anyone. Most people find that by setting aside plenty of time, assembly will go smoothly.
To hire an authorized service technician to assemble the weight bench, call
Before beginning assembly, carefully read the following information and instructions:
•Assembly requires two people.
•Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.
•Tighten all parts as you assemble them, unless instructed to do otherwise.
•As you assemble the weight bench, make sure all parts are oriented as shown in the drawings.
•For help identifying small parts, use the PART IDENTIFICATION CHART.
The included grease, and the following tools (not included) may be required for assembly:
• Two adjustable wrenches
• One hammer
• One standard screwdriver
• One Phillips screwdriver
• Clear tape or masking tape, and soapy water.
Assembly will be more convenient if you have a socket set, a set of
1.
Before beginning assembly, make sure you understand the information in the box above. For help identifying small parts, use the PART IDENTIFICATION CHART.
Attach an Upright (4) to the Crossbar (3) with two M8 x 65mm Bolts (48), two M8 Washers (32), and two M8 Nylon Locknuts (17). Make sure the warning decal is in the indicated position. Do not tighten the Locknuts.
Repeat this step with the other Upright (4).
1
4
4
3
48
Warning
Decal 48
32
17
5
