HOW TO USE A CUSTOM WORKOUT
1.Insert the key into the console.
See HOW TO TURN ON THE POWER on page 14.
2.Personalize console settings if desired.
See HOW TO PERSONALIZE CONSOLE SET- TINGS on page 14.
3. Select one of the four custom workouts.
To select a custom workout, press the Custom Workouts button. Then, press the left, right, up, or down Navigation buttons until the name of the de- sired workout (CUSTOM WORKOUT 1, CUSTOM WORKOUT 2, CUSTOM WORKOUT 3, or CUS- TOM WORKOUT 4) appears in the display.
In addition, the maximum speed and incline set- tings of the workout, the workout time, and a profile of the speed settings of the workout will appear.
Note: If the workout time is only three minutes, see HOW TO CREATE A CUSTOM WORKOUT on page 20.
4.Press the Start button to start the workout.
A moment after you press the Start button, the treadmill will automatically adjust to the first speed and incline settings that you programmed previ- ously. Hold the handrails and begin walking.
The custom workout will function in the same way as a classic workout (see step 4 on page 18).
If desired, you can redesign the workout while using it. To change the speed setting or the in- cline setting for the current segment, simply press the Speed or Incline buttons. When the current segment ends, the new setting will be saved in mem- ory. To increase the length of the workout, first wait until the workout is completed. Then, press the Start button and program speed and incline settings for as many additional segments as desired. When you have added as many segments as desired, press the Stop button and then the Speed de- crease button. To decrease the length of the work- out, press the Stop button twice at any time before the workout is completed.
To stop the workout temporarily, press the Stop button. To restart the workout, press the Start but- ton. The walking belt will begin to move at 1 mph. When the next segment of the workout begins, the treadmill will automatically adjust to the speed and incline settings programmed for the next segment.
5.Select a display mode and follow your progress with the display.
See step 5 on page 18.
6.Measure your heart rate if desired. See step 7 on page 17.
7.When you are finished exercising, remove the key from the console.
See step 8 on page 17.
21
