OVERVIEW OF THE PROGRAMMING OPERATION
How to Read the Screens
Operations are carried out using three basic screens: the Panel screen, the Sensor Block Factory screen, and the Command Block Factory screen. This section explains the role of each screen and how to switch between them.
When you open Robot Works, the title screen appears. Left clicking here will take you to the Panel screen.
Go to Sensor Block Factory
Note: To go to the Sensor Block Factory. Click one of the blue squares on the Panel Screen; to go to the command black Factory, click one of the pink triangles.
Go to Command Block Factory
The new block will appear here. Drag it over and drop it at the appropriate position on the panel.
The Panel Screen
This is the main screen used for programming the WonderBorg. Using the mouse to drag and drop blue sensor blocks and red and green command blocks, you can create a program very easily. (The illustration above shows a panel after a program has been input.)
31
OVERVIEW OF THE PROGRAMMING OPERATION
The Sensor Block Factory
This screen is used to create new sensor blocks on the Panel screen. A sensor block is a block specifying which sensor to use. It consists of yellow text on a blue block.
The Command Block Factory
This screen is used to create new command blocks on the Panel screen. A command block is a block specifying which command to execute. The command consists of an icon and text on a red or green block.
32
