Reebok Fitness RBTL09507.0 Be careful not to pinch the Upright Wire, Not fully fold the Frame yet

4. Set the Right Upright Spacer (79) on the Base	4		6
(83). Be careful not to pinch the Upright Wire
(38). With the help of a second person, hold a		78
Bolt Spacer (88) inside the lower end of the
Right Upright (78). Insert a 3/8" x 4 1/2" Bolt (6)
with a 3/8" Star Washer (9) into the Right				9
Upright and the Bolt Spacer. Repeat this step		79		38
with a second Bolt Spacer (88), 3/8" x 4 1/2"
Bolt (6), and 3/8" Star Washer (9). Then, set
the Right Upright in the Right Upright Spacer.
Tighten the 3/8" x 4 1/2" Bolts (6) with your fin-				88
gers; do not fully tighten the Bolts yet.
		83
5. With the help of a second person, carefully tip	5
the treadmill onto its right side. Partially fold the
Frame (56) so the treadmill is more stable; do
not fully fold the Frame yet.
Attach a Base Pad (81) to the Base (83) in the
location shown with a #8 x 1" Tek Screw (2) and			83
a Base Pad Spacer (13). Then, attach another	81			56
Base Pad (81) with only a #8 x 1" Tek Screw (2).
Remove the 3/8" Nut (8) and the 3/8" x 2"	2			90
Shoulder Bolt (90) from the Base (83). Attach a
Wheel (84) with the Bolt and the Nut that you		13
just removed. Do not overtighten the Nut; the
Wheel must turn freely.				84
		2	81	8
6. Set the Left Upright Spacer (76) on the Base	6
(83). With the help of a second person, hold a		6
Bolt Spacer (88) inside the lower end of the Left				74
Upright (74). Insert a 3/8" x 4 1/2" Bolt (6) with a
3/8" Star Washer (9) into the Left Upright and
the Bolt Spacer. Repeat this step with a sec-		9
ond Bolt Spacer (88), 3/8" x 4 1/2" Bolt (6),
and 3/8" Star Washer (9). Then, set the Left		76
Upright in the Left Upright Spacer.				83
Tighten the 3/8” x 4 1/2” Bolts (6) with your fin-
gers; do not fully tighten the Bolts yet.	88
With the help of a second person, tip the tread-
mill so that the Base (83) is flat on the floor.
	8