Reebok Fitness RBTL118040 manual Assembly requires a phillips screwdriver Rubber mallet

ASSEMBLY

Assembly requires two persons. Place the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until the treadmill is assembled.

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt, the sides of the walking platform, or the shipping carton. This does not affect treadmill performance. If there is lubricant on top of the walking belt or on the sides of the walking platform, wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires a phillips screwdriver		, a rubber mallet	, and wire
cutters	(not included).

1.Cut the plastic ties (not shown) from the sides of the treadmill. With the help of a second person, carefully raise the Uprights (65) until the Wheels (not shown) are resting on the floor.

Hold the Book Plate (114) against the back of the Console Base (117) and the tube on top of the Uprights (65), as shown. Attach the Book Plate with four 3/4” Screws (40).

2. Insert one of the Handrail Extensions (76) into the post on

the left side of the Uprights (65). Make sure that the

notch in the Handrail Extension is in the position

shown. Align the holes in the Handrail Extension with the

holes in the post. If necessary, use a rubber mallet to fully

insert the Handrail Extension. Attach the Handrail

Extension to the post with four 1/2” Screws (74).

Identify the Left Foam Grip (62), which has a hole in the

right side. Slide the Left Foam Grip as far as possible

onto the Handrail Extension (76) and the post. (Note: It

may be helpful to apply soapy water to the Handrail

Extension.) Press two Plastic Fasteners (75) into the bot-

tom of the Left Foam Grip and the Handrail Extension.

Attach the other Handrail Extension (not shown) and the

1	114
	40	40
	65	117
		40
2
		114
		128

Lower Edge

Post

74

76 62

Hole

74 Notch

Right Foam Grip (not shown) to the post on the right side of

the Uprights (65) in the same way. Note: There is not a hole

in the side of the Right Foam Grip.

Identify the Left Cup Holder (128); the lower edge is nar-

rower on the left side. Press the Left Cup Holder into the left

side of the Book Plate (114). Press the Right Cup Holder

(not shown) into the right side of the Book Plate.

75

65

74

6