Regency I1200S installation manual Installation, Fan / Blower

INSTALLATION

FAN / BLOWER

Your fan should only be installed once the unit is in place in order to prevent any damage to the fan.

1)Align the fan support with the offset clip on the bottom of the ashlip.

2)Slide the supports into the clips. The tension holding the clips in place may be adjusted by increasing or decreasing the offset spacing of the clips.

3)Ensure that the power cord is not in contact with any hot stove surfaces.

Do not turn fan ON until your insert has reached operating temperature or at least 30 minutes after starting fire.

CAUTION: Label all wires prior to disconnection when servic- ing controls. Wiring errors can cause improper and dangerous operation.

WARNING:

Electrical Grounding Instructions This appliance is equipped with a three pronged (grounding) plug for yourprotectionagainstshockhazard and should be plugged directly into

aproperly grounded three-prong receptacle. Do not cut or remove the grounding prong from this plug.

Neutral
Live	Green	Manual/	Fan
	Ground	Auto
120V AC		Switch	Switch
60 Hz
					White
Fan Thermodisc				Low
(normally open)	Black		Black	(Red)
	Black		High
			(Black)
			Fan		Fan	Ground

Blower / Fan Wiring Diagram

14 I1200 Regency Wood Insert