INSTALLATION
15)Cut the bottom edge of the fan support (using a metal cutting blade) to the length measured in step 14.
16)Remove the fan assembly from the ash lip of the insert and position the fan support to the bottom of the fan assembly.
17)Drill 4 x 5/32" holes to the underside of the fan assembly using the holes in the fan support as a guide. See Diagram 9
18)Secure the fan support to the fan assembly using 4 self tapping screws. See Diagram 9.
19)
Diagram 9: Rear / Bottom View
Completed Faceplate Assembly
I1200 Regency Wood Insert | 13 |