Gas Fireplaces
P36 - P36D Gas Fireplace
Vertical termination with co-linear flex system
The appliance must not be connected to a chimney flue serving a separate solid fuel burning appliance.
Masonry chimneys may take various contours which the fl exible liner will accommodate. However, keep the flexible liner as straight as possible, avoid unnecessary bending.
The Air Intake pipe must be attached to the inlet air collar of the termination cap.
This appliance is designed to be attached to two 3” (76mm)
Gas Fireplaces
Required Parts:
Part # | Description |
3” Flex - 35 ft. | |
Coaxial to | |
| the following: |
| Inner Pipe Adapter |
Flue Adapter | |
945 | 45º Elbow |
Alternate Approved Caps | |
980 | Vertical Termination Cap |
|
|
991 | High Wind Cap |
923GK | 3” |
Vertical Termination
Cap #
Amaximum of two certified
joiner kits
may be used |
|
per length. | Flex Liner |
|
| Exhaust |
| |
| Flue |
| |
Outer |
|
| |
Pipe |
|
| |
with Kit# |
|
| |
|
| ||
|
| Air Intake | |
Pipe Length |
| ||
|
| ||
|
| Flex | |
|
| Adapter | |
Rigid Pipe Adapter |
| with Kit# | |
| |||
# | 90 Degree | ||
| |||
| Elbow | Inner Pipe | |
|
| ||
|
| Adapter | |
|
| with Kit# | |
|
|
30 |
VerticalHeight(feet) | 30'Max. |
max. | 8'Min. |
2’ | ”1/2 |
|
Horizontal Distance (Feet)
The shaded area in the diagrams
show the allowable vertical
terminations.
Please refer to Page 11
(Exterior Vent Terminations) for additional guidelines on vent locations.
42 | June 2007 Regency Product Specifications Book |