Regency Wraps F38-LPG2 Installation, Notch Cutout, sit snugly against the bracket, PinCutout

INSTALLATION

6)Place the Left Top Log D)02-46 on the pin on Log B)02-56 and on top of the cutout on Log A)02-65.

9)Place the notch in Center Log F)02-47 over Log E)02-45 and across the cutout on Log

A)02-65.G)02-48

E)02-45

F)02-47

A)02-65

A)02-65

D)02-46

E)02-45

B)02-56

C)02-44

Notch Cutout

Side View

Bracket

The bottom right edge of Log G)02-48 must

sit snugly against the bracket

PinCutout

7)Place Front Right Log E)02-45 on the two pins as shown.

E)02-45

10)Position notch in Front Right Log G)02-48 on Log F)02-47 and push the bottom right edge against the bracket on the burner tray.

G)02-48

A)02-65

	47
F)02	-	E)02-45

11)Test fire to ensure proper light off (make sure fl ame fl ows smoothly from one end of burner to the other. If there is any fl ame hesitation, check that area for any blockage of the burner port.

8) Place the lava rock in the area between	Notch
the left and right logs, leaving a space in
the middle for log (F) 02-47.
Ensure that the lava rocks are not placed
directly over the burner ports.

	46
D)02	-
		F)02	-	47
	B)02-56

C)02-44

A)02-65

G)02
-
	48

E)02-45

10 Regency F38-2 Freestanding Gas Stove