System setup
3
2
1
5
4
1Align your H4i with your flow generator and push them together until they click into place.
2Connect the power cord to the socket on the rear of your flow generator.
3Plug the other end of the power cord into the power outlet.
Place the combined unit on a firm, level surface near your bed at a level lower than your sleeping position. Ensure the surface is not sensitive to heat and/or moisture, or use a protective mat.
4Connect one end of the air tubing firmly onto the air outlet.
5Connect the assembled mask system to the free end of air tubing.
WARNING
!• Make sure your flow generator is switched off at the power outlet before connecting the H4i.
•The H4i docking station should only be connected or disconnected when the water chamber is empty.
•Water must be prevented from entering your flow generator. Do not transport the flow generator with the H4i attached.
•The H4i is contraindicated for invasive use. An external humidifier approved for invasive use is recommended according to EN ISO 8185.
2
