Filling the water chamber
1 | 2 | 3 |
English |
1Open the cover.
2Remove the water chamber.
3Fill with fresh, clean water up to or below the maximum water level mark.
Note: The water chamber must be removed from the H4i before it is filled or water may enter the flow generator. The spill guard must also be in place.
4Return the water chamber to the docking station.
Note: Ensure that no water is collected between the heater plate and the water chamber.
5Close the cover ensuring that it clicks into place.
CAUTION
!• Do not overfill the water chamber as water may enter the flow generator and air tubing.
•Do not use any additives (eg, scented oils and perfumes). They may reduce the humidification output of the H4i and/or cause deterioration of the water chamber materials.
Detaching your H4i
1 | 2 | 3 | 4 |
1Unplug the power cord from the power outlet.
WARNING
!Take care when handling your H4i. The water and the water chamber base may both be hot. Allow 10 minutes for the heater plate and any excess water to cool.
2Remove the water chamber from the docking station.
3Press the large silver button located midway underneath the docking station.
Setting up your H4i for use | 3 |
