ResMed 60891/1 manual Removing the Mirage Swift

between the eye and the ear. The pillow sleeve should rest comfortably above your upper lip.

3Adjust the angle of the nasal pillows. To do this, rotate the pillow sleeve assembly forward or backward so that the nasal pillows sit comfortably inside your nostrils (B-3).

4Tube Retainer (optional).

Use the tube retainer if you prefer to have the short tube assembly secured to the headgear in the up position (B-4).

5The short tube assembly can be attached in four different ways (B-5). Note: The short tube assembly and cap can be connected to either side of the pillow sleeve. See “Disassembling for Cleaning” and “Reassembling the Mirage Swift II” for instructions on how to remove and attach the short tube assembly and cap.

6Connect one end of the main air tubing to your flow generator and the other end to the swivel. Turn your flow generator on.

Notes:

•Flow generator mask setting: If available, select “Swift”; otherwise select “Mirage” as the mask option when using the Mirage Swift II with ResMed flow generators that have mask setting options.

•SmartStop feature: This feature may not operate effectively when using the Mirage Swift II with some ResMed flow generators that have the SmartStop feature. This is particularly relevant when using the small size pillow sleeve.

If you feel air leaks, readjust the angle of the nasal pillows to get a better seal. You may need to readjust the headgear straps. Do not overtighten the headgear straps.

If you are unable to resolve any leaks you may need an alternative pillow sleeve size.

7Take time to adjust the following to achieve a secure and comfortable fit:

•headgear straps

•angle of the pillow sleeve assembly

•position of the short tube assembly.

Removing the Mirage Swift II

To remove the Mirage Swift II, pull the pillow sleeve assembly away from your nose and lift the headgear off your head. You do not need to loosen the headgear straps.

English

3