Problem | Possible Cause |
Display error message: | You have experienced |
HIGH LEAK!!! | excessively high leak levels for |
Adjust Mask | more than 20 seconds. |
Solution
Check that your air tubing is connected properly and that your mask does not leak excessively. Use the
If this message appears again, contact your clinician.
ENGLISH
Display error message: | Component failure. | Return your S8 Elite for servicing. |
Exxxx (where xxxx |
|
|
defines an error) |
|
|
|
|
|
The following message | The Data Card is not inserted | Ensure that the Data Card is |
is displayed on the | correctly. | inserted with the arrow facing up |
LCD after you try to |
| and pointing towards the device. |
update settings using |
| Ensure that the device is switched |
the Data Card: |
| on and in standby mode before |
Card Error |
| you insert the Data Card. |
Remove Card | The Data Card is only partly | Ensure that the Data Card is |
| ||
| inserted. | inserted into the slot on the Data |
|
| Card module as far as it will go. |
| You may have removed the Data | Reinsert the Data Card and wait |
| Card before settings were copied | for the Settings Success |
| to the S8 Elite. | Remove Card message to |
|
| appear on the LCD. |
| The card is not a ResScan Data | Only use a ResScan Data Card. |
| Card. |
|
The following message is displayed on the LCD after you try to copy data to a Data Card:
Card Error
Remove Card
The Data Card is not inserted correctly.
The card is not a ResScan Data Card.
You may have removed the Data Card before data was copied to it.
Ensure that the Data Card is inserted with the arrow facing up and pointing toward the device.
Use a ResScan Data Card, as specified in this manual.
Reinsert the Data Card and wait
for the Copy Complete Remove Card message to appear on the LCD.
The following message is displayed on the LCD after you try to update the settings using the Data Card:
Settings Invalid
Remove Card
The identification details on the | Contact your clinician |
Data Card do not match the | immediately. |
details on your device. |
|
TROUBLESHOOTING 35
