Messages on the S8 Series II LCD
Your clinician may have set your S8 Series II device to remind you about important events, such as when to replace your mask, when to insert your Data Card (if your device is Data Card enabled) and so on.
The reminder message is displayed on the LCD and is visible if the device is not delivering therapy. The backlight on the LCD flashes when a message is displayed. Your clinician can set any of the following reminders on your LCD:
Message | Description | Action |
|
|
|
|
|
| |
INSERT | May appear if your device is | Insert your Data Card and follow any |
| |
CARD | Data Card enabled. | instructions that your clinician has given you. | ||
|
| When you have done this, the message will | ||
|
| disappear from the LCD. Pressing | (Ok) | |
|
| will also remove the message. |
| |
|
|
|
| |
REPLACE | May appear when your mask | Press | (Ok) to remove the message | |
MASK | is due for replacement. | from your LCD, and replace your mask with a | ||
|
| new one. |
|
|
|
|
|
| |
CALL | May appear as a reminder to | Press | (Ok) to remove the message | |
PROVIDER | contact your clinician, eg, to | from your LCD, and contact your clinician. | ||
| discuss how your therapy is |
|
|
|
| going. |
|
|
|
|
|
|
| |
REPLACE | May appear as a reminder to | Press | (Ok) to remove the message | |
FILTER | replace the air filter on your | from your LCD, and replace the air filter. |
| |
| device. |
|
|
|
|
|
|
| |
SERVICE | May appear as a reminder to | Press | (Ok) to remove the message | |
DUE | return your device for service. | from your LCD, and contact your clinician. | ||
|
|
|
|
|
English
Using the Data Card to Collect Data
If your clinician needs to review your treatment, they will ask you to use the Data Card to copy data from your S8 Series II, and to return the card to them. The Data Card will be provided in a protective folder.
Data that is copied to a Data Card is still stored and available on the S8 Series II device.
Copy Data onto the Data Card
1Switch on the S8 Series II and wait until you see the standby (Ramp) screen.
2Hold the Data Card with the arrow facing up and insert it into the Data Card slot until it stops. Data copying starts automatically.
The “Card Inserted Please Wait” message is displayed on the S8 Series II LCD while data is being copied. Copying takes approximately five seconds.
The “Copy Complete Remove Card” message is displayed on the LCD when copying has finished.
Messages on the S8 Series II LCD | 9 |