Technical Specifications
Operating pressure range | 4 to 20 cm H2O |
Dimensions (H x W x D) | 4.6" x 6.5" x 5.7" (112 mm x 164 mm x 145 mm) |
Weight | 3.1 lb (1.4 kg) |
Operating Temperature | +41°F to +95°F (+5°C to +36°C) |
Power Supply | • Input range for S8 Series II with HumidAire 3i: |
| 110V, 400Hz; 2.5A <140VA (110W) (maximum power consumption). |
| Instantaneous peak power consumption <340VA. |
| • Refer to the |
| the ResMed |
| • Typical power consumption at 20 cm H2O is 39VA or 20.7W. |
Operating Humidity | |
Storage and Transport | |
Temperature |
|
Storage and Transport | |
Humidity |
|
Operating Altitude | Sea level to 8500’ (2591 m) |
Electromagnetic | Product complies with all applicable electromagnetic compatibility |
Compatibility | requirements (EMC) according to |
| commercial and light industry environments. The electromagnetic |
| compatibility tables for these ResMed devices can be found on |
| www.resmed.com, on the Products page under Service and |
| Support. Click on the PDF file for your device. |
Air Filter | |
Air Tubing | Flexible plastic, 6’ 6" (2 m) |
Air Outlet | The 22 mm conical air outlet complies with EN |
IEC | Class II (double insulation), Type CF |
Supplemental Oxygen | Recommended maximum supplemental oxygen flow: 4 L/min |
Housing Construction | Flame retardant engineering thermoplastic |
Noise Level | Radiated sound pressure is measured at <24±2 dBA at 10 cm H2O and |
| 3’3.36” (1 m) according to |
The manufacturer reserves the right to change these specifications without notice.
Symbols which appear on the device
Attention, consult accompanying documents; | Drip proof; | Type CF equipment; |
Dangerous voltage; Class II equipment; Start/Stop.
English
Troubleshooting 15