3.2 Connecting the respiratory circuit
CAUTION
Only the circuit supplied by your HME provider may be used with your device. Using a different type of circuit may reduce the effectiveness of your treatment.
Option 1 – Single circuit
1.Connect one end of the corrugated tube firmly to the air outlet, as
shown in the next figure :
P
Symbol identifying air outlet
1
Corrugated tube
Figure 8: Connecting a single circuit to the device
Once your circuit is connected to the device, you can connect the mask to the other end of the tube.
Option 2 – Single circuit with expiratory valve and pressure line
1.Connect the air outlet firmly to one branch of the corrugated tube .
2.Connect the expiratory valve tube (the only one fitted with a
white connector) to the valve control , then turn the connector slightly to the right to make the connection secure.
3.Finally, connect the other tube (with no connector fitted) to the
pressure line .
Note: If your circuit configuration does not include a pressure line, this third step will not apply.
Connection procedures | 9 |