Multi Media | Re:source |
Setup #3
SSID [...]
Here, you define the name of your network's SSID.
The [...] cursor is moved left and
right with the 
and 
softkeys. The 
softkey inserts a character to the left of the
[...] cursor. The 
softkey deletes the character where the [...] cursor is currently positioned.
SSID search
Alternatively, you can execute a
search with the 
softkey, followed by a listing of all the networks found.
Example of an SSID list:
The list is displayed in Setup #11. If, unexpectedly, the required network is not visible, it is possible that the Access Point (WLAN Router) is badly positioned or the
MMMaerial is not lined up correctly. Change the position and carry out a new search with the 
softkey.
If the required network is not found even though all conditions are fulfilled and the following display appears, it is possible that the cabled access (LAN) is already in place or the network name, (SSID), is hidden by the Access Point. In this case, the SSID must be entered manually, see SSID.
Select network
If the required network is visible, you select it with the 
softkeys and confirm your
choice with the 
softkey. You quit Setup #1 with the 
softkey. The existing setting in Setup #3 is retained.
15
