Replacement Parts.
For
Instructions For Placing a Parts Order
Address parts orders to the distributor or store where the heater was purchased.
All parts orders should include:
The model and serial number of the water heater from the rating plate.
Specify voltage and wattage as marked on the rating plate.
Part description (as noted below) and number of parts desired.
CAUTION: For your safety DO NOT attempt repair of electrical wiring, thermostat(s), heating elements or other operating controls. Refer repairs to qualified service personnel.
Some models may have
been supplied with External heat traps
in lieu of Internal heat traps
Relief valve
Hot outlet heat trap
or dip cup insert
(on top connect models only)
Dip tube gasket (on top connect models only)
Dip tube (on top connect models only)
Dip tube gasket
(on top connect models only)
Anode rod
Junction box cover
Plate cover
Top Connect Models
(see illustration below for other parts)
Anode rod
| Junction box cover |
| |
| Plate cover |
|
|
| Upper thermostat* |
|
|
| Upper thermostat protective cover* |
| |
|
| Cavity insulation |
|
Relief valve |
| Jacket access cover |
|
|
|
| |
Hot outlet heat tube |
|
|
|
(on side connect models |
|
|
|
only) |
|
|
|
Shroud | Thermostat bracket* |
|
|
Heating element* |
|
| |
|
|
| |
| Heating element gasket* |
|
|
| Lower thermostat |
|
|
| Lower thermostat protective cover |
| |
|
| Cavity insulation |
|
|
| Jacket access cover |
|
Drain valve |
| Thermostat bracket |
|
|
|
| |
Cold inlet nipple | Heating element |
| 17 |
(on side connect models | Heating element gasket | *These parts are supplied only on | |
only) | double element models |
| |
