Ricoh manual 99

Error Messages

Error Messages	Description
	The memory card is full and no more
Memory card full	images can be saved. Insert a new
	memory card or delete unwanted files.
No image	There are no images that can be played
	back on the memory card.
	You are trying to play back an image
This image cannot be	in a format not supported by this camera.
displayed	You may be able to play it back on a
	computer.
No card in the camera	There is no memory card inserted
	in the camera.
	The memory card has a problem,
	and image capture and playback are
Memory card error	impossible. You may be able to play
	it back on a computer.
	Failed to initialize the Eye-Fi function
	when using the Eye-Fi card. Press E.
	The memory card you have inserted is
	unformatted or has been previously used
Card is not formatted	on another device and is not compatible
	with this camera. Use the card after
	formatting it with this camera.
Card is locked	The write-protect switch on the memory
	card you have inserted is locked. (p.112)
This image cannot be	You are trying to magnify an image that
magnified	cannot be magnified.
	You are trying to delete an image that is
This image is protected	protected. Remove protection from the
	image. (p.81)

Error Messages		Description
Not enough battery power
remaining to activate Pixel
Mapping	These messages appear when you try to
	perform Pixel Mapping or Sensor
Not enough battery power
	Cleaning, or to update the firmware if the
remaining to clean sensor
	battery level is insufficient. Install a fully
Not enough battery power	charged battery.
remaining to update the
firmware
Unable to update firmware.	Unable to update the firmware. The
There is a problem with the	update file is damaged. Try downloading
firmware update file	the update file again.
	The maximum folder number (999) is
Image folder cannot be	being used, and no more images can be
created	saved. Insert a new memory card or
	format the card.
Unable to store image	The image could not be saved because of
	a memory card error.
	The camera was unable to adjust the
	manual white balance. Try the operation
The operation could not be	again.
	Failed to authenticate the wireless
completed correctly
	function when using the Flucard. Or,
	[Reset Transfer Settings] failed when
	using an Eye-Fi card or Flucard.
	You are trying to select more than the
	maximum number of images for the
No more images can be	following functions.
	•	Select & Delete
selected
	• RAW Development
	•	Protect
	•	Eye-Fi Image Transfer

6

Appendix

97