Ricoh 1050, 850 Exiting Connect Copy Mode

Using Connect Copy
255
4
Exiting Connect Copy Mode
APress the [
Connect
] key on the master unit.
The [
Connect
] key will be deselected.
Note
❒Settings which were selected on the master unit while in Connect Copy
mode will not be cleared.
❒Press the {
Clear Modes
} key to cancel the master unit settings and return to
the initial state.
❒The sub-unit will return to the state which is before entering Connect Copy
mode.
Reference
If you cannot exit Connect Copy mode, see ⇒ P.273 “If You Cannot Exit
Connect Copy”