Ricoh 1050, 850 If You Cannot Make Copies As You Want

What to do if Something Goes Wrong
276
5
If You Cannot Make Copies As You Want
Problem Cause Action
Copies are not stapled. There are jammed staples
in the stapler. Remove jammed staples. See ⇒ P.304 “
e
Removing
Jammed Staples”.
Note
❒After removing
jammed staples, staples
might not eject proper-
ly the first few times
you try to use the sta-
pler.
The number of copies ex-
ceeds the capacity of the
stapler.
Check the stapler capacity.
See ⇒ P.49 “Staple”.
Staples are wrongly posi-
tioned. Originals are not set cor- rectly. Set originals correctly. See
⇒ P.49 “Staple”.
Misfeeds occur frequently. The copy paper size setting
is not correct. Set the proper paper size. See ⇒ P.296 “Changing the
Paper Size”.
Make sure the back fence
in the paper tray is set cor-
rectly.
You cannot combine sever-
al functions. Selected functions cannot be used together. Refer to the combination chart. See ⇒ P.194 “Combi-
nation Chart”.
When sorting the pages are
divided into two blocks. Memory ran out during sorting and the pages were
ejected in two blocks.
You can interrupt copying
when memory runs out.
See “Memory Full Auto
Scan Restart” ⇒ P.330 “In-
put/Output”.