Copying
40
2
Auto Reduce/Enlarge

The machine can choose an appropriate reproduction ratio based on the paper

and original sizes you select.

Note

❒You can not set papers into the A3/11" × 17" Tray Kit.

❒When you use Auto Reduce/Enlarge, refer to the following table for possible

original sizes and directions:

❖
Metric version
*1 You can select from 81/2" × 13", 81/4" × 13" and 8" × 13" with the User Tools (Sys-
tem Settings). See “Original: F/F4 Size Setting” in the System Settings manual.
❖
Inch version
*1 You can select from 81/2" × 13", 81/4" × 13" and 8" × 13" with the User Tools (Sys-
tem Settings). See “Original: F/F4 Size Setting” in the System Settings manual.

❒The machine can select a ratio in the range 25–400 %.

❒For some originals, the original size might not be detected correctly. See ⇒

P.16 “Sizes Difficult to Detect”.

❒You can set originals of different sizes in the document feeder at the same

time. See ⇒ P.31 “Mixed Sizes Mode”.

Where Original Is Set Original Size and Direction
Exposure glass A3 L, B4 L, A4 KL, B5 KL, 81/2" × 13" L *1
Document feeder A3 L, B4 L, A4 KL, B5 KL, A5 KL, B6 KL, 11" ×
17" L, 81/2" × 11" KL, 81/2" × 13" L *1
Where Original Is Set Original Size and Direction
Exposure glass 11" × 17" L, 81/2" × 14" L, 81/2" × 11" KL
Document feeder A4 KL, 11" × 17" L, 11" × 15"L, 81/2" × 14" L, 81/2" ×
11" KL, 51/2" × 81/2" KL, 81/2" × 13" L *1