Copying
70
2
Note
❒To cancel Auto Start, press the {
Stop
} key.
❒In Connect Copy mode, press the {
Stop
} key on the master unit to cancel
Auto Start.

Original Tone

The tone sounds and an error message is displayed when you leave your origi-
nal on the exposure glass after copying, and set your originals in the document
feeder after copying.
Note
❒To stop the Original Tone, see “Original Tone” ⇒ P.318 “Display/Panel Tone”.

Sample Copy

Use this feature to check a copy set before making a long copy run.
Limitation
❒This function can be used only when the Sort function has been turned on.
Note
❒This function is only available on the master unit in Connect Copy mode.
ASelect Sort and any other functions, then enter the number of copies to be
made.
BSet the originals.
CPress the {
Sample Copy
} key.
One copy is delivered for proof copying.
DAfter checking the finish, press the [
Print
] key if the sample is acceptable.
The number of copies mode is the number you specified minus one for the
proof copy.
Note
❒If you press [
Stop
] after checking change, return to step A to adjust the copy
settings as necessary. You can change some settings. e.g., staple, punch,
margin adjust settings