Ricoh 1050, 850 If You Cannot Exit Connect Copy

If Your Machine Does Not Operate as You Want
273
5
If You Cannot Exit Connect Copy
Machine Status Cause Action
Nothing happens when
you press the [
Connect
] key. Originals are being scanned or copied. Press the master unit
{
Stop
} key and them press
[
Yes
] key to cancel scan-
ning or copying.
There is a paper misfeed in
either the master unit or
sub-unit.
Clear the paper jam in the
master unit or sub-unit.
Reference
See ⇒ P.289 “
x
Clear-
ing Misfeeds”
See ⇒ P.304 “
e
Remov-
ing Jammed Staples”
If the “Cover Open” dis-
play appears, follow the
instructions given.
For any other problems,
follow the instructions that
are displayed.
To exit Connect Copy
mode, press the master
unit {
Stop
} key, then press
the [
Connect
] key.
The master unit {
Stop
} key
was pressed and scanning
of the original has been in-
terrupted.
To exit Connect Copy
mode, follow the instruc-
tions on the display, then
press the [
Cancel
] key.
The {
Stop
} key was pressed
on either the master unit or
sub-unit and copying has
been interrupted.
To exit Connect Copy
mode, follow the instruc-
tions on the display, then
press the [
Cancel
] key.