Ricoh 1050, 850 To stop scanning temporarily, If memory reaches 0 %

Sort
45
2
To set the original on the exposure glass or in the document feeder using
Batch(SADF) mode
Reference
⇒ P.32 “Batch (SADF) mode”.
ASet the first page of your original, then press the {
Start
} key.
Note
❒The last page should be on the bottom.
BAfter it has been scanned in, set the next original then press the {
Start
}
key.
Note
❒Set the original in the same direction as the first one.
CAfter all originals have been scanned in, press the {
#
} key.
The copies are delivered to the tray.
To stop scanning temporarily
APress the {
Stop
} key to stop originals being scanned into memory.
To resume scanning
APress the [
No
] key to resume scanning.
Note
❒Scanned images in memory are not cleared.
To stop scanning and clear all scanned images from memory
APress the [
Yes
] key.
If memory reaches 0 %
Scanning will be stopped if the size of scanned image data exceeds memory ca-
pacity.
Note
❒There is enough memory to store approximate 1,000 originals of A4, 81/2" ×
11" size. The number of originals that can be stored in memory varies depend-
ing on the memory settings and original type.