Setting Originals

27

2
BSet the first page of your original face down on the exposure glass and align
it to the rear left corner.
1: Reference mark
2: Scale
CLower the document feeder.

Setting Originals in the Document Feeder

Note
❒The last page should be on the bottom.
❒Do not stack originals beyond the limit mark on the side fence of the docu-
ment feeder.
❒When copying thin originals (40 – 52 g/m2, 11 – 14 lb, Bond), set one page at
a time in the document feeder or on the exposure glass to avoid damage due
to multi-sheet feeds (several pages fed together at the same time).
❒Originals in pencil or other similar media may get slightly smudged after be-
ing scanned through the ADF. To avoid this, you can set them on the expo-
sure glass instead.
❒As a rule, one-sided originals are delivered to the ADF external tray, and two-
sided originals to the ADF tray.
Reference
For originals that the document feeder can handle, see ⇒ P.15 “Originals”.

To set a stack of originals in the document feeder

AAdjust the guide to the original size.
ND1C01EE
1
2