Configuration

Ethernet Configuration

Make the following network settings according to the network interface you are using.

You can use SmartDeviceMonitor for Admin or a Web browser to make IP address -related settings in a TCP/IP-capable environment.

Configure the printer for the network using the control panel.

The following table shows the control panel settings and their default values. These items appear in the [Host Interface] menu.

Setting Name

Value

 

 

 

 

DHCP

On

 

 

 

IP Address

011.022.033.044

 

 

Subnet Mask

000.000.000.000

 

 

Gateway Address

000.000.000.000

 

 

 

Frame Type (NW)

Auto

 

 

 

 

Active Protocol

TCP/IP

 

Active

 

 

 

 

 

NetWare

 

Active

 

 

 

 

 

SMB

 

Active

 

 

 

 

 

Apple-

 

Active

 

Talk

 

 

 

 

 

 

 

 

Ethernet Speed

Auto Select

 

 

 

 

LAN Type

Ethernet

 

 

 

 

 

If DHCP is in use, “IP Address”, “Subnet Mask”, and “Gateway Address” are all set automatically.

Make this setting only when it is necessary. See Software Guide.

A Press the {Menu}key.

G1168605A_1.10

Copyright © 2004, 2005 80