Configuration

The [Menu] screen appears on the display.

B Press the {U}or {T}key to display [Host Interface] menu, and then press the {# Enter}key.

Menu:

Host Interface

The interface setting menu appears.

C Press the {U}or {T}key to display [Network Setup], and then press the {# Enter}key.

The network setup menu appears.

D Press the {U} or {T} key to display [Active Protocol], and then press the {# Enter}key.

E Press the {U} or {T} key to select Active Protocol, and then press the {# Enter}key.

Active Protocol:TCP/IP

The following example explains activating TCP/IP.

The [Active] or [Not Active] selection screen appears.

F Press the {U}or {T}key to select [Active] or [Not Active], and then press the {# Enter}key.

TCP/IP:*Active

After the settings are made, about two seconds later, the screen returns to the active protocol menu.

G Set other protocols you need to set in the same way.

H Press the {Escape}key, the screen returns to the network setup menu.

❒The default is “Active”.

❒Leave unused protocols “Not Active”.

❒Enable TCP/IP to use the Pure IP environment of NetWare 5/5.1, NetWare 6/6.5.

I If you use TCP/IP, assign the IP address to the printer. Press the {U}or {T}key to display [IP Address], and then press the {# Enter}key.

The current IP address appears on the display.

81