Configuration

I Set [Trans. Speed] in the same way.

❒The factory default is [Auto]. If you need to change the transmitting speed depending on environment you are using, select the appropriate transmit- ting speed.

J If [Infrastructure] or [802.11 Ad hoc] is selected for [Comm. Mode], set SSID to use for transmission.

❒Confirm the network administrator for SSID to use.

❒SSID can also be set using a Web browser. For details, see the Web Image Monitor Help, and “Using Web Image Monitor”, Software Guide.

K Press the {U} or {T} key to display [SSID], and then press the {# Enter} key.

The following message appears on the display.

SSID:View

If an SSID has been set, you can check the set SSID. Press the {# Enter}key.

L Press the {U}or {T}key to display [Enter ID], and then press the {# Enter} key.

The following message appears on the display.

SSID: [ 0]

k

The value in brackets at the upper right is the number of characters entered.

M Press the {U}or {T}key to select characters, and then press the {# Enter }key.

SSID: [ 1]

Ak

You can now enter the next character.

N Continue entering the key.

❒The characters that can be used are ASCII 0x20-0x7e (32 bytes).

❒To display the previous character, press the {Escape}key.

87