Configuration

IEEE 802.11b (Wireless LAN) Configuration

Configure the printer to use IEEE 802.11b (Wireless LAN). The following table shows the control panel settings and their default values. These items appear in the [Host Interface] menu.

Setting Name

Default Value

 

 

Comm. Mode

802.11 Ad hoc

 

 

Channel

Inch version

 

(1-11) 11

 

 

 

Metric version

 

(1-13) 13

 

 

Trans. Speed

Auto

 

 

SSID

blank (ASSID)

 

 

WEP Setting

Not Active

 

 

❒To use IEEE 802.11b (Wireless LAN), select [IEEE 802.11b] for [LAN Type] in [Network Setup] in the [Host Interface] menu, and then set [IP Address], [Subnet Mask], [Gateway Address], [DHCP], [Frame Type (NW)] and [Active Protocol] under the [Network Setup] menu. For details about setting items under “Configuring the Printer for the Network”, see Software Guide.

❒The 802.11b interface unit cannot be used simultaneously with a standard ethernet interface.

❒In the [SSID] menu, if blank is specified in 802.11b Ad hoc mode or Ad hoc mode, [ASSID] appears.

A Press the {Menu}key.

The [Menu] screen appears on the display.

85